HDMI Extender Over RJ45 Cat5 Cat6 LAN Ethernet up to 60M at 1080p with POE + IR + LOOP
This HDMI Extender over one CAT6 is a tool for extending your HDMI signal over long distances to a compatible display.
Shopping points
After placing an order you will earn 0 points which you can spend to get rewards!
Description:
The HDMI Extender over Single Cat5e/6 with Bi-directional IR extends high definition video and audio signals and IR, at a distance of up to 60m over a single Cat5e/6 cable. Features EDID management, which allows and encourages source and display "handshake" for seamless integration. With only one cost effective Cat5e/6 cable, high definition sources with HDMI outputs can be connected to high definition displays with HDMI inputs over long distances. Deep color video, DTS-HD or Dolby TrueHD audio is supported and compatible with the extender. In addition, the extender is also equipped with bi-directional IR pass-through which allows for source or display control.The HDMI extender includes two units: transmitting unit and receiving unit. The transmitting unit is used to capture the HDMI input with IR signals and carries the signals via one cost effective Cat5e/6 cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR and serial control signals. The extender offers the most convenient solution for HDMI extension over a single Cat5e/6 with long distance capability.
Features
- Allows HDMI Audio/Video and IR signals to be transmitted over a single Cat5e/6 cable
- Bi-directional IR system allowing for control of source or display (IR accessories included)
- 2D/3D EDID management
- Transmission Range: Extends 1080p resolution up to 60m over a single Cat5e or Cat6 cable
- Works with HDMI and HDCP compliant devices
- Supports up to 1080p High Definition resolution
- Compact design for an easy and flexible installation
Specifications
- Video Bandwidth: Single-link 165Mhz [ 4.95Gbps]
- Video Support: 480i/480p/720p/1080i/1080p @60
- Audio Support: Surround Sound (up to 7.1 ch) or stereo digital audio
- Transmission Range: HD [1080p 24-bit color] – up to 50m [164ft]
- Input TMDS Signal: 3.3 volts
- InPut DDC Signal: 5.0 volts/P-P
- ESD Protection: Human Body model: +/- 8 kV (air-gap discharge)
- +/- 4 kV (contact discharge)
- PCB stack-up: 4 layouts
- HDMI connector: Type A 19 pin female
- RJ-45 connector: WE/SS 8P8C
- 3.5mm connector: (TX and RX) IR Receiver/IR Blaster
Package Contents:
- 1x HDMI Transmitter
- 1x HDMI Receiver
- 1x Windband IR Tx cable
- 1x windband IR Rx cable
- 1x 5V1A DC Power Supply Adaptor
- 1x Product Manual